The cabling was changeling. There are plenty of diagrams but all are a bit confusing to me. this section shows the rear brake cable. First I had to rig up a rear brake light switch.
Hold in place with the leg shields in place to check clearance.
A couple of decant jubilee clips around the bracket to secure.
On with the brake peddle return spring.
Washer Cir clip and grease nipple.
Fit the feral then slip in to the frame bracket.
Fit the feral then slip in to the frame bracket.
Then thread the inner cable through the feral into the front clamp and tighten.
Connect the inner cable to the rear clamp and tighten.
Adjust cable tension until the rear brake shoes are nearly rubbing the drum.
Brake pedal sitting up right and operates the brake light switch as soon as the pedal is depressed.
No comments:
Post a Comment