The big bits first.
The Legshilds needed a bit of feteling first and a tad of mig welding. strip off old paint then weld and straighten as best as I can. My desire is to keep as much of the original scooter as possible. only replace when l have to.
First StageSoon on went some primer and knife putty. After laying on the paint l move the panels to the loft where in the Summer it has been 40 degrees C. More light sanding and primer. 4 coats of grey primer as stated in the de structions. 4 coats of Beige and 4 coats of lacquer (from a tin of corse).
Not bad after just two coats of Beige, just two more then some lacquer.
Nice and clean looking ready for the six rubber strips with stainles steel ends.
http://www.shermonkel.com/
No comments:
Post a Comment